⌂ » Products » Customised pipes

Customised pipes

isoplus is able to supply a number of products in addition to those found in our catalogue and brochures. Contact isoplus’ technical department and let us find the right solution for your project.

Sometimes a project calls for custom-made solutions that are specifically made to fit the needs of your project. For example, if you need pipes to be placed above ground level or in areas affected by permafrost, pre-insulated customised pipes can be the right solution.

With pre-insulated customised pipes, there is no standard solution that suits everyone, since a customised pipe is an assembly of several different components and is made to fit the needs of your project. The specific solution will be individual, but usually it is the intended use of the product that determines which components are assembled. However, pre-insulated customised pipes are most often used when it comes to special requirements in terms of the installation environment, media, temperature load and/or pressure.

 

Components for customised pipes

There are many different combinations, but the typical components for pre-insulated customised pipes are:

Carrier pipe:

  • Welded black steel (besides P235GH)
  • Black steel with increased wall thickness
  • Seamless pipes
  • Stainless acid-resistant steel
  • HDPE

Jacket pipes:

  • HDPE jacket pipe with increased wall thickness
  • Spiro jacket pipe
  • White HDPE

Insulation:

  • Mineral wool
  • Mineral wool and PUR combined

Tracers:

  • Copper
  • HDPE
  • Aluminium

 

Examples of projects with pre-insulated customised pipes from isoplus

isoplus has delivered preinsulated customised pipes to, for instance, a system provider to the food industry. For establishing an indoor piping for hot frying oil, they needed a pipe that was approved for foodstuffs and could resist extremely high temperatures. The solution was provided with the help of isoplus’ technical department and consisted of seamless pipes, insulated with mineral wool in a white HDPE jacket pipe.

Another example is when a brewery needed to install steam and condensate lines to which isoplus delivered preinsulated customised pipes. The customer asked for frost-proof pipes. However, after a review of the project, it was decided that tracers were not required after all. Thanks to isoplus’ expertise they came up with a solution that involved a high-temperature line consisting of seamless carrier pipes and an insulation of mineral wool combined with PUR as well as a condensate line consisting of seamless carrier pipes with standard PUR insulation.

 

Application

District heating, district cooling, solar heating, community heating, industry

At isoplus you can always get professional support from project start until the piping system is installed.

We can help with planning, design calculations, installation of joints and installation of leak detection system.

Read more about isoplus service & support.

Contact us

T  +45 6441 6109
E  iso@isoplus.dk

Find your local sales office

Case references

District heating under the inlet in Hadsund

Establishing a 300-meter district heating pipeline may not sound all that spectacular, but there was something special about this project, when the southern part of Hadsund was connected to the northern city's district heating. The pipe had to be laid 1 meter below...

Trenchless technology to large project in Horsens

When 200 km of pipes and 180 km of service connections is to be buried, it is impossible to avoid inconveniences for the citizens. Many roads need to be dug up, which can cause traffic issues, broken roads, and frustrated citizens. In order to protect the surrounding...

Innovative project with new energy station in Tårnby

Tårnby Public Utility paves the way with a new visionary project in which an energy station will become the new gathering point for the area's district heating and cooling. Here the two systems will utilize the energy from the waste water. The plant will be the first...

Five oil villages’ path to sustainable solutions

Lolland Municipality takes the lead in the fight against climate change, as a new district heating project has begun on West Lolland. The municipal’s ambitious climate plan is based on the current energy policy, which includes phasing out oil-fired boilers by 2030 and...

Optimal supply for visionary urban development

In the South Harbour district in Aarhus, the second largest city in Denmark, a new heating transmission line from the Aarhus Heat Plant to Sydhavnsgade is intended to support a major urban development and ensure security of supply to the city. The neighbourhood of the...

Pioneering renewables project in Stirling

Stirling Council's district heating project will be the first in the UK to use a mix of pioneering renewable technologies to turn waste water into energy. A Combined Heat and Power (CHP) unit will supply the network with heating using a heat pump system to deliver...

Greenwich Millennium Village – Sustainable community

Greenwich Millennium Village (GMV) in south-east London is a flagship housing project built on an urban village model to set the standard for 21st century living and to serve as a model for the creation of new communities in England. The initiative aims to create a...

Sheridan College – Optimizing energy consumption

Sheridan College set goals to reduce its energy consumption by 65% and CO2 emission by 45% by 2030. With four separate campuses enrolling 40,000 students, the college focused on reducing the consumption of the two largest campuses. To achieve the project's goals new...

University of Rochester – From steam to hot water

The University of Rochester is one of the country's top-tier research universities. The campuses are home to 200 academic majors, more than 2,000 faculty and instructional staff, and some 10,000 students which yields high requirements for the capacity and safety of...

A sustainable village becomes a reality

In Føns on West Funen, Denmark a vision about sustainable village became a reality. In October 2015, a brand-new wood chip-fueled heating plant was established, which now provides heating for 43 local households. isoplus has supplied the pipes and made the detailed...